You are here

Filtered Rack and Panel

×

Status message

We noticed you are browsing from out of Asia, we would like to redirect you to our international site.
Yes No
Filtered Rack and Panel
  • ARINC 404, ARINC 600 and MIL-DTL-83527 shell styles
  • Intermateable and Interchangeable with standard non-filter connectors
  • Meet or exceed all applicable requirements of military specifications
  • Offered in a number of different contact arrangements and shell sizes

Filtered rack and panel connectors include ARINC 404, ARINC 600 and MIL-DTL-83527 shell styles. Filtered rack and panel connectors are designed to meet or exceed all applicable requirements of each series and are intermateable and interchangeable with standard non-filter connectors. Non-Filter applications can easily be upgraded to EMI/Transient protection without modification to the system through Smiths Interconnect In-Line filter adapters. The adapters are designed to be installed between the existing plug and receptacle without having to re-wire or disassemble the system.

Offered in a number of different contact arrangements and shell sizes

C, L, Pi filter types

Filtering technology (Planar Arrays, Discoidal) to suit application

Unfiltered (high speed) and ground lines

Transient Protection proven to RTCA D160F Section 22 levels 3,4 & 5

Protection against primary lightning, EMI and EMP

Materials and Finishes

ShellAluminum allow/Steel/Composite
InsulatorHigh grade plastic/epoxy
ContactsCopper alloy, gold plate
Grommet & Seal   Silicon base elastomer
Jam NutAluminum alloy
Ground PlaneBeryllium copper, silver plate
CapacitorBarium Titanate
InductorFerrite bead

 

Production Automation Test System Measurements

 RangeAccuracyNotes
Capacitance1 pF-1µf0.2% + 0.1 pf1
DF0.00001-101%2
Inductance100 nH-10KH0.2%+10 nH1
IR1 K Ohm - 5 T Ohm1%3,4,5
DWV10 pA-100 mA1%+10 pA3,4,6
VR10 mV-100V0.2% + 10 mV7
Ground & Contact Resistance0.1 mV-1V0.1%+0.1 mV7
Notes:
  1. Frequency = 20 Hz to 1 MHz
  2. Dissipation factor
  3. With 5-500 volts applied
  4. Measures each pin to all other pins grounded to shell
  5. Insulation resistance
  6. Dielectric withstanding voltage
  7. Isource = 1nA-1A

All specifications are subject to change without notice